LAN networking :: essays research papers

If you want to add extra data processors to your earnings in the future, all you need are more profits Interface Cards and 10BaseT argumentations. Simply plug the new network loosens(s) into your computing device an run a cable form the card to one of the hubs open port wines.For even greater expandability, the hub can be joined, or uplinked, to early(a) hubs. If you look closely at the front of the hub, you will see a port marked Uplink. To uplink a hub, simply insert a standard, straight-through 10BaseT cable between the Workgroup Hubs Uplink port and some(prenominal) of another hubs level(p) 10BaseT ports. A maximum of three hubs can be connected to hurther.For example, equivalent most hubs, a 5-Port Hubs port number 5 and Uplink port are joined internally. This means that when port 5 is in use, the uplink port cannot be used, and vice-versa. If you plan on using the uplink port, youll need to disconnect any cables that are connected to port 5.Setting up your network cards software involves initiation a network device driver onto your computer. The driver will allow the card to communicate with your Network Operating organisation (NOS). Software package. Some of these NOS include Windows for Workgroups, Windows 95/98, Windows NT, and Novell. All the network cards that you buy should come with a 3.5 software disk where it includes drivers for different NOS. They should as well have instructions on how to install them, but this hand bulge will help you understand and teach you how to install drivers.After installing your network card hardware in your computer, follow the instructions beneath to install the cards software.1.Install the network card hardware if you havent already2.Start up your computer and Windows 95/98.3.Windows 95/98 will automatically detect the presence of your network card hardware in your computer.If Windows 95/98 goes immediately to the windows desktop, and does not boasting a new hardware detected message. Go to my computer control panel system device manager tab shoot the network adapter and remove it from the list restart computer and you should get a windows asking for drivers. Important When you reboot Windows 95/98 may ask you for the Operating System CD ROM. Please provide them as necessary.4. Windows 95/98 will detect your network card and display a New Hardware Found window as shown yawl5. Put your 3.5 in drive A with the network card drivers that came with the it.